Marble Composite Aluminum Honeycomb Panel

Marble Composite Aluminum Honeycomb Panel

About Marble Composite Panel

A marble composite panel, as the name implies, is the panel processed by combining marble and other materials. Marble can be composited with ceramic tiles, glass, aluminum honeycomb, and other materials. Compare with the other decoration materials, the marble composite panel features the following.

1. Lightweight

The thinnest marble slab can be only 3~5mm thickness, plus the composite material on the back, it is only 15-18mm thick, which can greatly reduce the weight.

2. Increased strength:

After marble is compounded with ceramic tiles, granite, aluminum honeycomb panels, etc., its bending and bending strength are obviously improved, which greatly reduces the damage rate during transportation, installation, and use.

3. Easier to control chromatic aberration

Because the marble composite board is cut into 3 or 4 pieces with a 1m2 original board (full-body board), it becomes 3m2 or 4m2, and its pattern and color are almost 100% the same as the original board, so it is easier to ensure large-area use.

4. Easy to install

Due to the above characteristics, during the installation process, regardless of weight, fragility (strength, etc.), or color separation, the installation efficiency, and safety are greatly improved, and the installation cost is also reduced.

Applications: floor tiles, wall panels, countertops, etc